![]() |
Cruise control woes
The cruise control light does not come on I changed the switch and that didn't help from what I can tell this truck has and ecm controlled cruise instead of vacuum controlled cruise regardless all blower positions work(no broken vacuum lines😁)
This truck is an 02 3500 4x4 6speed manual any help or points n the right direction would b greatly appreciated |
Any ABS light or codes?
|
could be the clock spring in the steering wheel.
|
Idk bout codes I'll c what the smarty says later
How do I go about checking the clocks spring?!? |
Well I plugged the smarty n today and she didn't have ne codes stored n her
Do I prolly need to 2 look n2 the clock spring ?!?! |
I have heard people having issues with the clock spring not letting the cruise kick on. How to change it out I don't know but I am sure there are a few write ups on google.
|
Sounds like the clock spring. It's located in the steering wheel column. Does your horn work?
|
Originally Posted by kryz9903
(Post 1101385)
Sounds like the clock spring. It's located in the steering wheel column. Does your horn work?
|
Yes it can still be the clock spring even without any air bag lights.
|
1 Attachment(s)
Found my problem it was a broken wire right at the plug in where my tilt steering tilts not bad once I got all the plastic off lol thanks for all the advice guysAttachment 30549 I hope y'all can c the picture gonna get some solder tommorow and then on with the fass install
|
All times are GMT -5. The time now is 01:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands