i need a cummins mechanic. oh & sum 1 to go racing with
Yeah Betsy & blowing smoke. Its definitely not cold down here, there is a lever like thing on what looks like on the fuel pump,I pushed it down like 30 x & it did not feel any different from the 1st couple of times I pushed it down,truck still did not start after doing that? Only with starting fluid starts it. 1 Guy said do not use starting fluid!! He said use silicone spray instead. I just nd a GD Mechanic by me 2 take a look at this truck & fix it 4 me, or show me how to fix it & I will try. I just can't afford to get my azz ripped off again or mess the truck up more. I appreciate all of ur help so far.. 
Okay. was there any pressure on the lever like if you press it down n let go does it come right back up on it's own.
The reason starting fluid is not recommended on these trucks is the grid heaters. They can cause pre-ignittion with starting fluid. If you need to use starting fluid unplug atleast 1 of the small wires on each your grid heater solonoids first so they won't come on. The wts light will kick on but the actual grids won't.
Diesel Bomber
Joined: Jun 2010
Posts: 3,202
Likes: 143
From: Tacoma
wish I could make it to florida for ya man... It sound like a possibility of the pump being out of time.... good possibility infact....... the injector...UUUhhhh it would just smoke more and be a little hard to start but not too bad... your fuel setting could be too low as well which would starve the motor of fuel...... the turbo having play is not a good thing to hear either... probably gonna need to invest in a turbo as well.... hows your fuel filter ?? how long has it been since its been replaced ??
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
Oct 31, 2014 08:10 AM
Diesel Bombers
General Diesel Related
0
Oct 24, 2014 04:40 AM
Omingnome
Diesel In Distress - Support Ticket
5
Oct 20, 2014 12:25 PM
