Found a suprise on my engine
#11
well thats what i was thinking. i cant seem to find any leaks. and i deffinatly cant hear anything hissin. i redone my intake tube, and i picked up some boost but still around that 8 -10 psi range. oh btw i have my star wheel turned to loosest setting. soapy water in a squirt bottle work for finding leaks?
---AutoMerged DoublePost---
i have checked for leaks. none were found. i have an auto tranny, being the engine isnt loaded as much as a man. trans would be, could that be the issue? because you dont build boost untill the engine is loaded, taller gear, brake torque ETC. does anyone have any other ideas cause i'm all out
---AutoMerged DoublePost---
i have checked for leaks. none were found. i have an auto tranny, being the engine isnt loaded as much as a man. trans would be, could that be the issue? because you dont build boost untill the engine is loaded, taller gear, brake torque ETC. does anyone have any other ideas cause i'm all out
Last edited by CUMMINStagetcha19; 01-16-2012 at 09:40 PM. Reason: Automerged Doublepost
#14
#15
Only do the 12cm^ housing if you don't tow heavy loads. I put a stock Hx35 off of a 98 12 valve and t made my truck pretty toasty pretty fast. When I first talked about doing this mod no one mentioned it wouldn't be good for towing and I wished they would have. I had a 16cm^ non gated housing I bought for my H1C but I sold it when I got the HX35. I have since, bought another 16cm^ non gated housing for the HX35 and with stock injectors I couldn't make it get hot.
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
klein444
Chevy/GMC 6.2L and 6.5L
13
06-20-2015 11:48 PM
hershwork
Dodge Truck and Cummins Turbo Diesel Forum
5
03-01-2015 05:15 PM
metal_miner
Diesel Engine Conversions
7
12-23-2014 11:40 PM
hunt4beer
5.9 Liter CR Dodge Cummins 03-07
5
11-15-2014 09:06 AM