i have a 92 3/4 ton with the stock 5 speed trans that is bad i have a nv4500 to put in it what all will i need make it work. any info will help me out thanks

 

you need the bellhousing adapter that goes to the back of the block, clutch hydraulics, possibly drivelines, shifter and i believe thats about it

 

If it's a 2wd Advanced Adaptors makes a bellhousing that literally allows you to bolt the NV4500 in where the Getrag is, no special clutch, hydraulics, block plate, starter or flywheel.
For 4wd, they also offer a shifter install kit to adapt the NP205 shifter to the nv4500.

I acquired a 4wd one recently for a future project, pretty slick unit.

Mark.