can't get the alt to charge the batt any help
i have took the alt out and had it checked twice and had the batt checked and come up good all around. All thee studs on the alt have the same voltage as the batt but i was also told that that the back of the alt should magntise when the alt is on but it is not.
any help would be great
o it is on a 91 intercooled 12 valve

any help would be great
o it is on a 91 intercooled 12 valve
use the search button. it is a very common problem. first off, check your external regulators. the charge goes through those, regulate the voltage, sends it through the computer, and then the computer sends it to the batteries
check this thread out also ironworker and see if it will help too https://www.dieselbombers.com/1st-ge...lternator.html
and what part of missouri ya from
and what part of missouri ya from
about a hour east of Kansas City. I can not find the voltage regulator i have looked in the center of the fire wall and under the dash with no luck
Last edited by ironworker; Apr 20, 2010 at 09:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post
joejack6.0
Ford Powerstroke 03-07 6.0L
0
Apr 29, 2015 11:45 PM
Big _red _cummins
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
Nov 17, 2014 02:44 PM
D71P
Ford Truck and Powerstroke Turbo Diesel Forum
0
Oct 10, 2014 09:53 AM




it was right there in front of my face put a new voltage reglator and it fixed my prob thanks ever body

