HELP truck ran fine last night now will not start
#22
Oh i forgot to mention that when the jackass who owned it before thought he would be cool and install a 4 point race harness he drilled a hole in the top of my tank i tried to patch it with a big bolt and some jb weld but it still drips a little.
---AutoMerged DoublePost---
I checked over the lines only place it leaks is from the bolt
---AutoMerged DoublePost---
I checked over the lines only place it leaks is from the bolt
Last edited by NadirPoint; 04-13-2010 at 11:28 AM. Reason: Automerged Doublepost
#24
Got it going today she fired up air in lines big time. I don't understand half of the **** the guy b4 me did to the truck he spent the money to make it twin turbo but then half assed the rest of the truck. I bought with the plans of fixing everything but lost my job and have just been driving it as is for now. If it has a weak lift pump would that mater being there is a high flow fuel pump on the frame rail that i installed? or is the lift pump acting as a restriction to the external fuel pump.
#25
#27
#29
Yea the solenoid is gutted now. the heater and filter assembly is tight all the fittings look good and yea i think that it still has the factory lift pump and my high flow pump is just there. However sometimes if i shut off the elec pump it is more prone to dieing. Which makes me think the factory lift pump is going out.
Thread
Thread Starter
Forum
Replies
Last Post
doublehbar
24 Valve 2nd Gen Dodge Cummins 98.5-02
13
08-09-2015 12:35 AM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM