Transfer case
#1
#2
the trucks with the gas engine unless they are one ton usually have dana 44 front axles. it also at best has a dana 60 rear. the 60 is kinda light but would prob work. ur diesel has a dana 70 in the rear. the dana 44 in the front however just aint hardly gonna cut it. it would prob last a little while but it aint safe. the front springs attached to the 44 def. aint gonna take it.
the 2wd 727 has the wrong tail shaft to work with a transfere case. also the t-case in that gas truck isnt gonna take it. u would need a trans and transfere case from a 1989 to 1993 dodge diesel.
to do what ur talkin about all ur really gonna use from the 4x4 truck is the frame. u would use the rear axle and engine from the diesel. would need to find a front axle(preferably the same ratio as ur rear axle so u dont have to change the gears), front springs, trans, t-case, and both drivelines. i could help u out but it looks like ur the whole way across the country.
the 2wd 727 has the wrong tail shaft to work with a transfere case. also the t-case in that gas truck isnt gonna take it. u would need a trans and transfere case from a 1989 to 1993 dodge diesel.
to do what ur talkin about all ur really gonna use from the 4x4 truck is the frame. u would use the rear axle and engine from the diesel. would need to find a front axle(preferably the same ratio as ur rear axle so u dont have to change the gears), front springs, trans, t-case, and both drivelines. i could help u out but it looks like ur the whole way across the country.
#4
the trucks with the gas engine unless they are one ton usually have dana 44 front axles. it also at best has a dana 60 rear. the 60 is kinda light but would prob work. ur diesel has a dana 70 in the rear. the dana 44 in the front however just aint hardly gonna cut it. it would prob last a little while but it aint safe. the front springs attached to the 44 def. aint gonna take it.
the 2wd 727 has the wrong tail shaft to work with a transfere case. also the t-case in that gas truck isnt gonna take it. u would need a trans and transfere case from a 1989 to 1993 dodge diesel.
to do what ur talkin about all ur really gonna use from the 4x4 truck is the frame. u would use the rear axle and engine from the diesel. would need to find a front axle(preferably the same ratio as ur rear axle so u dont have to change the gears), front springs, trans, t-case, and both drivelines. i could help u out but it looks like ur the whole way across the country.
the 2wd 727 has the wrong tail shaft to work with a transfere case. also the t-case in that gas truck isnt gonna take it. u would need a trans and transfere case from a 1989 to 1993 dodge diesel.
to do what ur talkin about all ur really gonna use from the 4x4 truck is the frame. u would use the rear axle and engine from the diesel. would need to find a front axle(preferably the same ratio as ur rear axle so u dont have to change the gears), front springs, trans, t-case, and both drivelines. i could help u out but it looks like ur the whole way across the country.
#5
#6
Go buy a 4x4 truck with a Cummins or find a W300 with a Dana 60 front...
#7
Thread
Thread Starter
Forum
Replies
Last Post
steves2500diesel
Dodge Truck and Cummins Turbo Diesel Forum
0
10-14-2014 05:36 PM