1st Generation Dodge Cummins 89-93 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps

1st gen speed sensor

Thread Tools
 
Search this Thread
 
  #11  
Old 01-21-2010, 07:59 PM
tltruckparts's Avatar
Diesel Bomber
Join Date: Aug 2009
Location: Lincoln, CA
Posts: 2,124
Received 102 Likes on 94 Posts
Default

Originally Posted by bowdiesel
does anyone else out there use an hr meter...if so what would be a good # to do oil changes at ......since iv had the truck/last rebuild.. bin doing 3500K w/filter using rotella oil....I will be taking readings with a meter this week-end on a 90 1st gen that's VSS is working and compare to mine.....If i find anything will post how to and what reading you should get across wires back to dash....Im leaning towards ECM ng
with a good wiring diagram, it should be easy to figure out whats wrong with it and whether or not its the computer or not. find out what the wire that goes from the computer to do speedo does (ground flash, pulse, etc) and measure it with your multi meter. if you have no output at the computer you know what it is. and make sure and check for continuity between all the wires you could have just lost a wire connection somewhere
 
  #12  
Old 01-21-2010, 10:25 PM
tltruckparts's Avatar
Diesel Bomber
Join Date: Aug 2009
Location: Lincoln, CA
Posts: 2,124
Received 102 Likes on 94 Posts
Default

can someone get the spammer?
 
  #13  
Old 01-21-2010, 10:34 PM
seandonato73's Avatar
Diesel Wrench
Join Date: Oct 2009
Location: lebanon, Pa
Posts: 603
Received 9 Likes on 9 Posts
Default

wtf???? the only thing i know about power levels is turning the chip up in my buddys 7.3L
 
  #14  
Old 01-21-2010, 11:00 PM
tltruckparts's Avatar
Diesel Bomber
Join Date: Aug 2009
Location: Lincoln, CA
Posts: 2,124
Received 102 Likes on 94 Posts
Default

Originally Posted by seandonato73
wtf???? the only thing i know about power levels is turning the chip up in my buddys 7.3L
haha its a scammer for world of warcraft. apparently they need even more people on that site instead of the other several million on there
 
  #15  
Old 01-23-2010, 08:35 AM
bowdiesel's Avatar
Diesel Fan
Thread Starter
Join Date: Aug 2009
Location: long island ,ny
Posts: 39
Likes: 0
Received 2 Likes on 2 Posts
Default

WAIT MAYBE WE SHOULDN'T HAVE BANNED THAT POWER CRAFT WARLORD WARRIOR WAR CRAFT VIDEO GAME GUY ...HE MIGHT HAVE BEEN A EXPERT" ELECTRONIC WIZ" GEEK THAT COULD BE HELPING US WITH ELECTRONIC PROBLEMS NO... NEVER MIND ILL STICK TO THE 1ST GEN FREAKS....
 
  #16  
Old 02-16-2010, 04:45 AM
moneyman_09's Avatar
Diesel Enthusiast
Join Date: Dec 2009
Location: Waterloo Indiana
Posts: 241
Received 4 Likes on 4 Posts
Default

so if the ecm goes bad then your mph and odo both quit working?? Because my mph work but the trip odo and the actual odo quit working at 201,xxx I no my truck has it fair share of electrical issues but don't really know what that would not work also the 4wd indicator light the wait to start and the water in fuel light do not work low fuel works the temp gauge bounces around after it's warm thanks for any help by the way it's a 92 cummins
 
  #17  
Old 02-23-2010, 04:24 PM
bowdiesel's Avatar
Diesel Fan
Thread Starter
Join Date: Aug 2009
Location: long island ,ny
Posts: 39
Likes: 0
Received 2 Likes on 2 Posts
Default

I RECENTLY TOOK A USED COMPUTER THAT WORKED AND SWAPPED IT OUT TO SEE IF MY SPEED O PROBLEMS AND VOLTAGE REGULATOR ISSUES WOULD GO AWAY ..............AND NOTHING ......I THINK OLD WIRING .....IF NOT IM GOING TO CHANGE MY CRANK POSITION SENSOR AGAIN (WHICH WAS USED)....GOT MY HANDS ON A GOOD ELECTRICAL SCHEMATIC AND LOOKS LIKE A LOT OF FUNCTIONS RELY ON THE CPS TO BE WORKING PROPERLY ON THOSE 1ST GENS ...AND CHECK OR REPLACE THOSE GROUNDS ....ALSO TRY PULLING THAT ECM MULTI PIN MAIN HARNESS PLUG OUT AND CHECK ALL THOSE PINS ....I FOUND A BUNCH ALL GREEN AND RUSTED ON MY FRIENDS TRUCK CLEANED IT UP AND ALL OF HIS PROBLEMS WENT AWAY...ME... NOT SO LUCKY
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cdog121
1st Generation Dodge Cummins 89-93
6
11-16-2015 01:49 PM
robbyS
5.9 Liter CR Dodge Cummins 03-07
3
04-16-2015 02:22 PM
Tory4
For Sale
0
02-01-2015 08:33 PM
chris_fininzio
Ford 83-94 6.9 and 7.3L General
0
12-17-2014 10:50 AM
ajpt6.9
1st Generation Dodge Cummins 89-93
3
12-04-2014 12:06 PM



Quick Reply: 1st gen speed sensor



All times are GMT -5. The time now is 12:21 PM.