VE Pump
#11
This is wat i found out:
It looks a little different because it doesn't have an AFC or KSB. That means you won't have a pin to grind, an AFC lever to remove, or a smoke screw to mess with. The only external adjustments appear to be idle, high idle, and the power screw.
and with a NV4500 and 3.54 gears i got 4th gear to top out at 95
It looks a little different because it doesn't have an AFC or KSB. That means you won't have a pin to grind, an AFC lever to remove, or a smoke screw to mess with. The only external adjustments appear to be idle, high idle, and the power screw.
and with a NV4500 and 3.54 gears i got 4th gear to top out at 95
#14
Well, DUDE... Isn't that something you could have said earlier?
There doesn't seem to be an air fuel control on top of that pump; I think that's a fuel banjo-bolt at the top, right? So consider that your AFC settings are all already maxxed out. So that leaves a full power screw, timing, and a governer spring that you can modify.
Of course, since this is a tractor, it means that it'll be thrashed on a daily basis and you need to be extra careful to not overload anything on the driveline. And you also need a pyrometer.
There doesn't seem to be an air fuel control on top of that pump; I think that's a fuel banjo-bolt at the top, right? So consider that your AFC settings are all already maxxed out. So that leaves a full power screw, timing, and a governer spring that you can modify.
Of course, since this is a tractor, it means that it'll be thrashed on a daily basis and you need to be extra careful to not overload anything on the driveline. And you also need a pyrometer.
#16
Yikes; I'll bet that thing is a freight-train-level smoker if you put it to the floor, isn't it? The tractor was probably a hand-throttle?
Do you have a tach? The pump might have a 3200 RPM spring in it stock. If it even uses the same type of springs, which I'd assume it does.
What's the rest of the driveline in the truck?
Thread
Thread Starter
Forum
Replies
Last Post
HardLuck
Diesel In Distress - Support Ticket
0
06-24-2015 08:04 AM
Renteria1217
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
04-16-2015 11:38 PM
B.k. Smith
12 Valve 2nd Gen Dodge Cummins 94-98
10
01-07-2015 02:29 PM