Injector decision
sure it will. those turbos are essentially the same turbo just different turbine housings. the old h1c's had 50mm compressors and the later had the same 54mm compressor as the wh1c's and hx35's
this should be close dont quote me
old h1c 50/58/18
newer h1c 54/58/21
wh1c and hx35 are identical shaft wise @ 54/58/12
the difference is the last number which is the volume of the turbine
this should be close dont quote me
old h1c 50/58/18
newer h1c 54/58/21
wh1c and hx35 are identical shaft wise @ 54/58/12
the difference is the last number which is the volume of the turbine
Diesel Wrench
Joined: Dec 2010
Posts: 549
Likes: 20
From: Salt Spring Island
Found these specs on a dead google link (cached):
HX35, HY35, and HE351 - Turbo Ranger Forums
HX35, HY35, and HE351 - Turbo Ranger Forums
HX35 8-blade:
A/R- 0.89
Compressor inducer- 56mm
Compressor exducer- 83mm
Compressor trim- 46
Turbine inducer- 69.5mm
Turbine exducer- 60mm
Turbine trim- 75
HX35 7-blade:
A/R- 0.89
Compressor inducer- 56mm
Compressor exducer- 76mm
Compressor trim- 54
Turbine inducer- 69.5mm
Turbine exducer- 60mm
Turbine trim- 75
HY35:
A/R- 0.65
Compressor inducer- 56mm
Compressor exducer- 76mm
Compressor trim- 54
Turbine inducer- 65mm
Turbine exducer- 58mm
Turbine trim- 80
HE351:
A/R- 0.65
Compressor inducer- 60mm
Compressor exducer- 84.582mm
Compressor trim- 54
Turbine inducer- 65mm
Turbine exducer- 58mm
Turbine trim- 80
A/R- 0.89
Compressor inducer- 56mm
Compressor exducer- 83mm
Compressor trim- 46
Turbine inducer- 69.5mm
Turbine exducer- 60mm
Turbine trim- 75
HX35 7-blade:
A/R- 0.89
Compressor inducer- 56mm
Compressor exducer- 76mm
Compressor trim- 54
Turbine inducer- 69.5mm
Turbine exducer- 60mm
Turbine trim- 75
HY35:
A/R- 0.65
Compressor inducer- 56mm
Compressor exducer- 76mm
Compressor trim- 54
Turbine inducer- 65mm
Turbine exducer- 58mm
Turbine trim- 80
HE351:
A/R- 0.65
Compressor inducer- 60mm
Compressor exducer- 84.582mm
Compressor trim- 54
Turbine inducer- 65mm
Turbine exducer- 58mm
Turbine trim- 80
