pump mod question
#1
pump mod question
So I re sealed my injection pump, turned the stock fuel pin and turned the fuel screw approximately one turn. Everything else is stock.
Also I may have moved the pump closer to the head when I installed it, the metal boost line to the pump didn't want to fit right so I had to bend it closer to the engine.
I noticed it smokes white/gray while idling and the engine seems louder. I haven't driven the truck much lately because of the pump leaking and it is COLD out. Maybe my imagination.
Would my mods cause the smoke and noise?
I didn't move star wheel or smoke screw, should I?
Also I may have moved the pump closer to the head when I installed it, the metal boost line to the pump didn't want to fit right so I had to bend it closer to the engine.
I noticed it smokes white/gray while idling and the engine seems louder. I haven't driven the truck much lately because of the pump leaking and it is COLD out. Maybe my imagination.
Would my mods cause the smoke and noise?
I didn't move star wheel or smoke screw, should I?
Thread
Thread Starter
Forum
Replies
Last Post
ItsAChummins
Diesel In Distress - Support Ticket
2
05-15-2015 05:02 PM