electrical problems I think
#11
#14
The relays really do work, no kidding! Your turn signal switch has problems, your hi-beams go thru it and all. Its a expensive damn cheesy switch. Replaced mine, about 2 years later, *** in a parking lot pulled out in front of me....totaled the rear of his riceburner, my only problem was Another turn signal switch....hibeams,lobeams, turn, hazards, hell, most everything goes thru that damn switch.
You'll need a security torx bit to remove one of those screws....I did mine with a air chisel and a new metric std. torx screw from Fastenal....(I bought a box of them)
You'll need a security torx bit to remove one of those screws....I did mine with a air chisel and a new metric std. torx screw from Fastenal....(I bought a box of them)
Last edited by Screamin' Metal; 11-15-2012 at 09:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
coryfast
Diesel In Distress - Support Ticket
2
07-06-2015 06:02 AM