Ok guys I have a 97 2500 and my wipers are jacked up I only have the two highest speeds and when I shut them off they dont return to there normal positions. Any idea where I should start.

 

replace the whole switch, its like $50 take the covers off of the steering colum and it comes right out like 2 screws holding it in

 

let me spell this problem out for you M O P A R

 

i just had exact same problem with my 98. i replaced switch, timer module, pionted in wrong direction on both. turns out that problem is almost always caused by the wiper motor itself. guess i should have asked the guys at napa to begin with! napa was also by far the cheapest on a new with lifetime war.

 

i would think tho since they do work on the higher speeds that the switch would be more likly

 

i thought the same thing which is why i bought switch and timer module first..... to solve the exact same problem. was told that 99% of time its the actual motor. which was true for mine, fixed everything! yours could be different i guess????? let me know what you find out....

---AutoMerged DoublePost---

i like how it says newbie under my name since i have been playin with these trucks since the day they were made!

 

I dont think Ive ever had a problem with the motor itself I've definitely changed a few switches tho.

 

Thanks for the replies fellas I'll try to remember to let ya know what I find, now what to replace first I guess I might try to meter the motor leads and see if I get voltage on the lower setting that should rule out the motor itself.