Cracked Timing Gear Cover
#21
#22
#23
Here's the thread with the vid jazzercise posted it up first https://www.dieselbombers.com/dodge-...ome-video.html and as for removing the gear vs the whole cam that's news to me.
#24
A recent post I made about this same subject: https://www.dieselbombers.com/24-val...e-removal.html
And another thread I was postin on about it. My stuff starts at post number 26. https://www.dieselbombers.com/1st-ge...kdp-cheap.html
And another thread I was postin on about it. My stuff starts at post number 26. https://www.dieselbombers.com/1st-ge...kdp-cheap.html
#25
IDK...I was always told the cam has to come out to get the gear off....the front cover is just stamped sheet metal....the case part itself is cat aluminum I think.....I guess if you can take the cam gear off with the cam in the engine and replace it then you wouldn't have to pull the cam...I have never attempted it so I don't know for sure....just what i have always been told.
#26
to replace the casing, the cam has to come out cuz the gear n the cam itself are 1 piece. if you pulled the cam gear off, you'd have to have extremely precise marks so you could get your valve timing correct. pullin the cam really isn't as scary as it seems, n it has to be done if ur gonna replace the case. the injection pump gear will come off with a puller
Thread
Thread Starter
Forum
Replies
Last Post
quiksilver1j
1st Generation Dodge Cummins 89-93
1
07-30-2015 12:41 PM
carid
Diesel Bombers Sponsors
0
07-16-2015 05:11 AM
Spiderman
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
10-06-2014 09:52 AM