lift pump ,question
#11
I bought my FP gauge from Kenny at Ken's Performance. We went though some trials and got everything worked out. Isspro now sells the needle valve that is needed to dampen the pulses and Kenny should be able to put all that together for you. On my '98 I could uses the 24V boost bolt in the stock fuel filter housing but the '95 has a different housing IIRC....anyway....I'm sure Kenny can fix you up with a kit.
#12
#13
Here is the link:
diesel, performance, dodge, ford, chevy, gauges, fass, smarty,edge, S&B Filters
He doesn't have it on the site but if you call him he'll know: (707)580-6782
I started with a mechanical gauge and we had some problems with the 12V beating the hell out of the gauge.....I put snubbers and needle valves on and even had Isspro send me different size pistons for the snubber.....I ended up with a EV2 electric gauge and the snubber and all is fine. Kenny was fantastic as well as Isspro to work with through the entire deal. I promise you will find NO ONE goes as far as Kenny does for his customers.
diesel, performance, dodge, ford, chevy, gauges, fass, smarty,edge, S&B Filters
He doesn't have it on the site but if you call him he'll know: (707)580-6782
I started with a mechanical gauge and we had some problems with the 12V beating the hell out of the gauge.....I put snubbers and needle valves on and even had Isspro send me different size pistons for the snubber.....I ended up with a EV2 electric gauge and the snubber and all is fine. Kenny was fantastic as well as Isspro to work with through the entire deal. I promise you will find NO ONE goes as far as Kenny does for his customers.
Thread
Thread Starter
Forum
Replies
Last Post
Renteria1217
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
04-16-2015 11:38 PM
klein444
Chevy/GMC 6.2L and 6.5L
2
02-21-2015 10:33 AM