my egt probe is in the exhaust manifold. i can hit 45 lbs but its still on the stock headgasket so i only did it once, i keep it around 35-40lbs

 

not on a stock WH1C your not

 

um yeah i am , the wastegate is plugged

 

I see 35 40 psi with my stock turbo, head bolts, and gasket quite often.. 1100 deg If i keep my foot in it very long.

 

with no plate in my truck and a stock HX35 with the wastegate plugged i was seeing 42psi and 1600+ on the pyro after i shifted into 3rd. that was stock everything except 4" exhaust.

 

42 psi on a stock HX35? Yikes... The drive pressure must have been 55+.

 

drive pressure???

 

if there was some way i could hold a camera and full boost my truck i would show you a stock hx35 hit about 58lbs, done it 1 time and now i try to keep it under 40lbs. dont have the money to fire ring the head and studs right now

 

ya i've heard that at 40-45psi on an hx35 depending on exhaust it'll be as high if not higher than 75psi drive pressure. with my HTT 64/71/14 at 52psi i have 50psi of drive pressure

 

u hit 58lbs w/o studs and o rings or fire rings? thats way too much