New guy trans help
#1
New guy trans help
Hey guys, new to DB looking for a little trans help. I recently picked up a 1999 Ram 1500 QCSB with a 96 12v motor and auto trans in it. I need to get a TV cable for it but im not sure what I should be ordering it for. Im assuming it goes by length so I would need to get one for a QCSB? Any help would be appreciated. Thanks gents!
---AutoMerged DoublePost---
and where would a guy find a new cable, online or dealer if anyone has an idea.
---AutoMerged DoublePost---
and where would a guy find a new cable, online or dealer if anyone has an idea.
Last edited by cummin_not_strokin; 03-05-2014 at 08:43 PM. Reason: Automerged Doublepost
#5
after looking at it better and getting up in there, everything is there but the plastic clip the holds the cable into the trans bracket is borken on one side and is letting the plastic clip start to pull through, thus um-adjusting the cable. Going to try and glue it and see how trans shifts before I spend money on a cable....maybe jus do a 5 speed right away if it seems bad
#9
Especially if your in town .... Left leg gets tired ... Unless u know how to float gears ... Then its the right arm ... . My F250is a 4 spd.... It gets old .. Too lazy to do a auto swap
The 47rh/re will hold just as much power and its faster through the gears .... Set it and forget it ...
The 47rh/re will hold just as much power and its faster through the gears .... Set it and forget it ...
Thread
Thread Starter
Forum
Replies
Last Post