Anyone running lockers to pull with?

 

Call Mike Jr. at www.superioraxle.com... tell him Brad said hi

Complete drivelines, lockers, axles, gears, etc... He'll make custom setups for pulling, drags or both...

 

no but i have 2 different types of lockers in my jeep and both have done well.
i run an aussie locker in my front end and a detroit locker in the rear..

only problem ive ever had is i used to have a detroit ezlocker and i kept blowing it up. but that was just a lunchbox locker

 

i need somethin for my '97!!! cant hook up when leaving the line during racing. Just one wheel peel bullshizzit!!!

Lance

 

One of my friends is running a haisley machine locker, seems to be doing good

 

All of the top running, competitve trucks in the Indiana area are running welded differentials or true (i.e. ARB & Detroit) lockers, front & rear.

 

ARB front and back worked for me.

BBD

 

i want a from arb and rear detriot but not for pulling.....

 

I'm Building Custom Inner Axle And Locker Set Ups For The 94-02 Dana 60 Dodge Front Ends. My Kits Upgrade To 1.5" 35 Spline 4340 Chromoly Inner Axles And Are Custom Made To Length And Also Replace The 2 Piece Axle Set Up On The Long Side Axle To Eliminate Problems Locking In 4wd And Breakage Issues. With This Set Up You Can Use Trac Loc, Arb, And Detroit Lockers.

 

I have a Detroit locker in mine, works great! clatter from spinning on wet pavement will scare a passenger!


Ian