BD-Power Steering Stabilizer
#1
#3
#4
#5
#7
@ztk7220 i put on the 08+steering assembly and a carli suspension high mount steering stab and it will correct the pull to the right and it helped with the wobble but i still have it, i have a adjustable track bar that i havent put it on yet because i need bushings with a 5/8 hole and mine have a 1/2 inch hole and im still gona put a dual steering stab on it to so that way i will have a triple stabilizer setup i also want to do the steering box brace as well and hopefully this will correct it...any suggestions or tips are greatly appreciated...
#8
I just had one installed last Monday, and it made a helluva difference on mine; less slop, LOT less wobble on expansion joints and the like.
It was just the latest step in upgrading the entire front end.
I've now done the steering upgrade (from Source,) Bilstein stabilizer, new suspension (KORE HP,) track bar bushing upgrade, MAXXlinks sway bar links. Next is upper and lower ball joints, as I'm at 82K miles with the stock ball joints.
Put the new tire/wheel combo on this August, and it's bringing the stock deficiencies to light pretty quickly.
It was just the latest step in upgrading the entire front end.
I've now done the steering upgrade (from Source,) Bilstein stabilizer, new suspension (KORE HP,) track bar bushing upgrade, MAXXlinks sway bar links. Next is upper and lower ball joints, as I'm at 82K miles with the stock ball joints.
Put the new tire/wheel combo on this August, and it's bringing the stock deficiencies to light pretty quickly.
Last edited by jc3835; 12-19-2010 at 09:29 PM.
#9
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
10-29-2015 02:11 PM
1MooseheadPlease
Chevy/GMC 6.2L and 6.5L
3
10-13-2014 05:33 AM