35s on a stock 3rd gen 4x4
#1
35s on a stock 3rd gen 4x4
my buddy has a 2005 ho longbed cummins and i have a lead on some hummer wheels wraped with 35s and i think they will fit on his truck w/o a leveling kit for now he doesnt think so minimal rubing would be ok let me know if its possible
---AutoMerged DoublePost---
also i have fit 35s with no modification on a 2nd gen this is what makes me think its possible
---AutoMerged DoublePost---
also i have fit 35s with no modification on a 2nd gen this is what makes me think its possible
Last edited by 1993firstgennewbie; 04-15-2010 at 04:53 PM. Reason: Automerged Doublepost
#2
I have a 3rd gen.. I ran 35's on stock wheels, which have more (or less) whatever backspacing on the wheels. I had no problems, except it rubbed the lower control arms at full lock. Didn't bother me enough to change it until I needed new tires. When I bought new tires, I went with 315/70/17's on the same stock rims, and I have no rubbing issues.
Scott
Scott
Thread
Thread Starter
Forum
Replies
Last Post
Cdog121
1st Generation Dodge Cummins 89-93
6
11-16-2015 01:49 PM
Jsully
12 Valve 2nd Gen Dodge Cummins 94-98
0
08-31-2015 07:55 PM
CGwill
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
01-26-2015 02:10 AM