My 1990 DODGE Project Restoration PICS!
#21
5" out the back corner, Nothing over the top, Id like to to stay stock looking, Ill throw on some nice aluminum dually wheels when the day comes but that will be about it for exterior mods.
I put the pillar gauge pod in today for a lil 10 min job. Torched the bed bolts and hacked the stupid exhaust off. Ive got a backhoe comming Monday to pull the bed.
I put the pillar gauge pod in today for a lil 10 min job. Torched the bed bolts and hacked the stupid exhaust off. Ive got a backhoe comming Monday to pull the bed.
#23
#24
#25
I dont know how much you can improve with just an impeller change. Still a small housing. Dont get me wrong the Stock H1C can hold its own as long as you are not towing a huge load.
You can measure the wheel and that will tell you what you have.
Also keep your eye out for a HX35 to toss in there!
You can measure the wheel and that will tell you what you have.
Also keep your eye out for a HX35 to toss in there!
Last edited by RSWORDS; 12-15-2008 at 05:56 AM.
#27
You should use the 35 DP. With a little massaging it should fit. On the other hand you can find a H1E for little money (mine was free) and hybrid it to your Stock H1C.
---AutoMerged DoublePost---
Oh and the 1st gen needs cab lights
---AutoMerged DoublePost---
Oh and the 1st gen needs cab lights
Last edited by RSWORDS; 12-15-2008 at 01:26 PM. Reason: Automerged Doublepost
#28
H1E.... I dont know jack about these trucks.... is the "E" like the HX and HY turbo... only on certain models?