Custom Items You've Built For Your Truck
#33
Is working on it, need to finish with front end, tie rods outside and bottom balljoints.
Here are some pic's, working on it in between, been busy in shop with customer work.
http://s174.photobucket.com/albums/w98/saab9k/
blue bed is off my other truck, we was working on tranny when pic was taken.
Here are some pic's, working on it in between, been busy in shop with customer work.
http://s174.photobucket.com/albums/w98/saab9k/
blue bed is off my other truck, we was working on tranny when pic was taken.
#34
#35
I got it from Bob Verhoff in Oregon or Washington I cant remember...its an Eaton fuller **** and I use the front switch to activate my exhaust brake and the side switch for my 2 wheel low range................I also cut 4" off my stick to accomidate it better...if you cut the stick let me know cuz its hallow and trickey
#37
Here is my finished truck with home made bed, did have to buy 2 floorplates, rest i found in shop and in scrap yard. Made bed heavy for better ride.
On the top of bed in back, made a storage bin for chains and binders.
Painted the bed with tractor paint $33 gal, and clearcoated it $80.00 gal.
Painted truck with dupont white and clear, that paint is expensive, wanted to make truck original in paint.
truck with bed and full tank weight in at 7740 lbs.
On the top of bed in back, made a storage bin for chains and binders.
Painted the bed with tractor paint $33 gal, and clearcoated it $80.00 gal.
Painted truck with dupont white and clear, that paint is expensive, wanted to make truck original in paint.
truck with bed and full tank weight in at 7740 lbs.
#38
Here is a pic of my Eaton Fuller installed last Friday. I had to cut 3 inches off my stick to return to stock height.
Attachment 1334
Attachment 1335
Attachment 1334
Attachment 1335
cool man..now get you a chunk of 3/8" pipe insulation the foam stuff and run it down the stick to the rubber boot
saab9k...good job on the flatbed...looks good
#39
#40