no smoke?
#1
no smoke?
ok im new to duramax trucks but i recently bought a 2002dmax 6" lift 35" tires. my last powerstroke blew alot of smoke with a bully dog but now my duramax wont blow any with the bully dog triple pup. now i have the older model edge juice with attitude and the hot unlock code and it still barely blows any smoke. all i want is to be able to flip a switch and role smoke all over any ******* at a redlight or on the road only when needed. can any one tell me a cheap or easy upgrade to make it so i can do that? please
any help is greatly appreciated thanks again
any help is greatly appreciated thanks again
#2
Plastic bag/tshirt/granny panties over airfilter will get your smoke. You can do a search and find the proper method
On a serious note, there are different mods you can do. I know my truck will put out nice cloud on the hot tunes, but it clears up real fast. The duramax was designed as cleaner diesel engine. Your better off just leaving said a-hole in a cloud of tire smoke. There isn't really a cheap way to make smoke that isn't hard on your engine. EFI Live with a smoke tune will be your best bet
On a serious note, there are different mods you can do. I know my truck will put out nice cloud on the hot tunes, but it clears up real fast. The duramax was designed as cleaner diesel engine. Your better off just leaving said a-hole in a cloud of tire smoke. There isn't really a cheap way to make smoke that isn't hard on your engine. EFI Live with a smoke tune will be your best bet
The following users liked this post:
BRE (04-13-2011)
#4
The following users liked this post:
KuNtRy BoY (04-14-2011)
#6
Sorry I didnt see this earlier. You can buy a tuned ECM for your truck from duramaxtuner.com. they come with tunes pre programmed by a guy and i hear he does good work. My truck was custom dyno tuned by Danville performance in Danville, IN. You can either find a shop that does EFI live tuning and pay them to do it(recommended method in this case) or you can buy the software and other equipment and do it yourself. You may be getting in over your head trying to do it your self, I am not sure on what your experience level is with this stuff. I know I am a little timid about trying it myself, but would love to learn. I am not real good with computers or electronic stuff.
#7
The following users liked this post:
Dirtymax14 (03-20-2013)
#9
There is a setting on the edge juice with attittude that lets you adjust smoke output. When i adjusted mine back when i had it, it would blow a healthy dose of smoke before it would clean up. The duramax uses the mass airflow sensor to limit fuel, the computer will not feed all the commanded fuel to the engine until the airflow has caught up.
I assume the more smoke setting on the edge works the same as modifying the MAF tables with EFI live, basically you manipulate the MAF sensor and get more of, or all of the fuel you command with the pedal instead of it slowly increasing fuel output as the air comes in.
I assume the more smoke setting on the edge works the same as modifying the MAF tables with EFI live, basically you manipulate the MAF sensor and get more of, or all of the fuel you command with the pedal instead of it slowly increasing fuel output as the air comes in.
Thread
Thread Starter
Forum
Replies
Last Post
mattshow123
12 Valve 2nd Gen Dodge Cummins 94-98
14
03-12-2018 01:41 PM
gagemotors
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
06-09-2015 04:24 AM