no smoke?
ok im new to duramax trucks but i recently bought a 2002dmax 6" lift 35" tires. my last powerstroke blew alot of smoke with a bully dog but now my duramax wont blow any with the bully dog triple pup. now i have the older model edge juice with attitude and the hot unlock code and it still barely blows any smoke. all i want is to be able to flip a switch and role smoke all over any asshole at a redlight or on the road only when needed. can any one tell me a cheap or easy upgrade to make it so i can do that? please
any help is greatly appreciated thanks again |
Plastic bag/tshirt/granny panties over airfilter will get your smoke. You can do a search and find the proper method:w2::tttt:
On a serious note, there are different mods you can do. I know my truck will put out nice cloud on the hot tunes, but it clears up real fast. The duramax was designed as cleaner diesel engine. Your better off just leaving said a-hole in a cloud of tire smoke. There isn't really a cheap way to make smoke that isn't hard on your engine. EFI Live with a smoke tune will be your best bet:tttt: |
thanks for your help where is the best place to get one of those? is it on the fly?
|
smoke is for losers
Pure clean power is for winners....:rocking: |
Simply put smoke for the sake of smoke is GAY!
|
Originally Posted by diezlepwr
(Post 739899)
thanks for your help where is the best place to get one of those? is it on the fly?
|
my suggestion would be talk to Nick (duramaxtuner.com) and get a programed ecu with a dsp5 switch, this will allow you to switch between 5 programmed tunes of what you want, he can do a smoke tune, and a cool lope tune as well
|
your best bet would definitely be EFI live...good luck, let me know what you go with and how good it is...I'm in the market for a tuner.:tu:
|
There is a setting on the edge juice with attittude that lets you adjust smoke output. When i adjusted mine back when i had it, it would blow a healthy dose of smoke before it would clean up. The duramax uses the mass airflow sensor to limit fuel, the computer will not feed all the commanded fuel to the engine until the airflow has caught up.
I assume the more smoke setting on the edge works the same as modifying the MAF tables with EFI live, basically you manipulate the MAF sensor and get more of, or all of the fuel you command with the pedal instead of it slowly increasing fuel output as the air comes in. |
What setting caused the smoke? mine on level 5 with airdog fuel pump, 5" turbo back straight pipe with stacks barely leaves any smoke?:dang:
|
All times are GMT -5. The time now is 12:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands