Group Buy Group Buys And Discussions of Group Buys On All Diesel Related Products

HORNBLASTERS GROUP BUY !!!

Thread Tools
 
Search this Thread
 
  #21  
Old 08-01-2008, 06:12 PM
HOLYSMOKES's Avatar
NADM Member
Thread Starter
Join Date: Mar 2007
Location: PERRY / LICKING COUN
Posts: 342
Received 26 Likes on 18 Posts
Default

This is the wireing comming through the firewall and getting power from the battery box.


HORNBLASTERS GROUP BUY !!!-horns2-022.jpg

HORNBLASTERS GROUP BUY !!!-horns2-023.jpg
 

Last edited by HOLYSMOKES; 08-01-2008 at 06:26 PM.
  #22  
Old 08-01-2008, 06:13 PM
HOLYSMOKES's Avatar
NADM Member
Thread Starter
Join Date: Mar 2007
Location: PERRY / LICKING COUN
Posts: 342
Received 26 Likes on 18 Posts
Default

I chose to NOT tie my horns in with the stock horn switch for 2 reasons. #1, I wanted the sound to be "all trainhorn". This way I have "city horns" and "highway horns". Funny how much I get those reversed. #2, I have a 2 year old son....need I say more? LOL The switch you see here sends power to the system. On the right is a small momentary push button that actuates the horns. If the switch is off on the left (the one you see) the system does not come on. IF an air leak ever arrived, I coulf just shut them off and not drain the batteries.


HORNBLASTERS GROUP BUY !!!-horns2-021.jpg
 

Last edited by HOLYSMOKES; 08-01-2008 at 06:30 PM.
  #23  
Old 08-01-2008, 06:28 PM
mikmaze's Avatar
Diesel Wrench
Join Date: Apr 2008
Location: cedar Grove NJ
Posts: 552
Received 29 Likes on 29 Posts
Default

nice lookin pics, but I beg ya, install a lanyard or ball valve to run the horn, much more fun to be able to "talk the horns" than just blap them with a solenoid
 
  #24  
Old 08-01-2008, 06:32 PM
HOLYSMOKES's Avatar
NADM Member
Thread Starter
Join Date: Mar 2007
Location: PERRY / LICKING COUN
Posts: 342
Received 26 Likes on 18 Posts
Default

OH I agree whole heartedly! Im researching that now!
 
  #25  
Old 08-01-2008, 06:56 PM
mikmaze's Avatar
Diesel Wrench
Join Date: Apr 2008
Location: cedar Grove NJ
Posts: 552
Received 29 Likes on 29 Posts
Default

not sure what you drive, but on the dodges there is a plug in the floor panel under ht e drivers seat, it can be removed leaving an oval about 1.5 inch long, by about an inch wide. A single slice with a razor knife will allow the passage of air lines. a pair of hose hold down clamps to the tranny shifter boot on the floor will hold a half inch ball valve in easy enough reach. I have mine setup that way, set another up for a friend, and have not had any water troubles to speak of.
 
  #26  
Old 08-02-2008, 06:29 PM
HOLYSMOKES's Avatar
NADM Member
Thread Starter
Join Date: Mar 2007
Location: PERRY / LICKING COUN
Posts: 342
Received 26 Likes on 18 Posts
Default

06 mega 4x4 auto

---AutoMerged DoublePost---

SPEAKING OF COMMING IN HANDY. Im on the interstate, here comes one of the fast and furious civics down the ramp. I couldnt get over. There were 4 guys in the car. EVERYONE OF THEM trying their best to stare me down. Judging by the sound of her the ole civic was wound out. They just kept staring, and throwing their hands in the air, and bouncing up and down in the car to what ever was on the ipod. I gave them a lil 6 second blast. That car must of found another gear because it TOOK off. I didnt even get a chance to roal the coal.
 

Last edited by HOLYSMOKES; 08-02-2008 at 06:31 PM. Reason: Automerged Doublepost
  #27  
Old 08-04-2008, 06:11 AM
HOLYSMOKES's Avatar
NADM Member
Thread Starter
Join Date: Mar 2007
Location: PERRY / LICKING COUN
Posts: 342
Received 26 Likes on 18 Posts
Default

Thanks to those that have purchased! For the rest, the last day is thursday!
 
  #28  
Old 08-05-2008, 06:45 PM
HOLYSMOKES's Avatar
NADM Member
Thread Starter
Join Date: Mar 2007
Location: PERRY / LICKING COUN
Posts: 342
Received 26 Likes on 18 Posts
Default

Only 2 days left!!!!!
 
  #29  
Old 08-06-2008, 07:52 PM
Woligator's Avatar
Diesel Enthusiast
Join Date: Sep 2007
Location: Quebec Canada
Posts: 113
Received 1 Like on 1 Post
Default

price for viair dual 450C 150psi and 100/150 switch plz
 
  #30  
Old 08-07-2008, 05:28 AM
HOLYSMOKES's Avatar
NADM Member
Thread Starter
Join Date: Mar 2007
Location: PERRY / LICKING COUN
Posts: 342
Received 26 Likes on 18 Posts
Default

I will get that price for you. Also, today is the last day for the group buy. I will be out of state for a week after that. Thanks, Smokes
 


Quick Reply: HORNBLASTERS GROUP BUY !!!



All times are GMT -5. The time now is 12:55 PM.