FU2 Chip
#14
#16
With the FU...
You get a chip, a burner, and the software to download tunes (pre-made standard calibrations) from our server. No modification to any of the tunes is possible on the customer's end. You can reburn the chip as often as you'd like and put any available calibration in any of the 6 positions.
With Minotaur....
You get a chip, a burner, the software to burn the chip (same as FU). In addition, you get the Minotaur software that allows you to make any modification to the tuning (factory calibration or any of the handful of standard calibrations that Bill sends with the setup; usually 5 or so). You can make ANY changes that we at PHP can as the definition files that we sell to the customer are the same ones we use on a daily basis for our own tuning. There is no limit to what you can change, either. So, if you want to blow the engine up intentionally as soon as it starts, that's doable.
There is no limit to the number of tunes you can write, and there is no limit to the number of reburns to the chip.
You get a chip, a burner, and the software to download tunes (pre-made standard calibrations) from our server. No modification to any of the tunes is possible on the customer's end. You can reburn the chip as often as you'd like and put any available calibration in any of the 6 positions.
With Minotaur....
You get a chip, a burner, the software to burn the chip (same as FU). In addition, you get the Minotaur software that allows you to make any modification to the tuning (factory calibration or any of the handful of standard calibrations that Bill sends with the setup; usually 5 or so). You can make ANY changes that we at PHP can as the definition files that we sell to the customer are the same ones we use on a daily basis for our own tuning. There is no limit to what you can change, either. So, if you want to blow the engine up intentionally as soon as it starts, that's doable.
There is no limit to the number of tunes you can write, and there is no limit to the number of reburns to the chip.
Thread
Thread Starter
Forum
Replies
Last Post
Dieselhead1052
Ford Powerstroke 99-03 7.3L
0
11-26-2014 05:43 PM
Dieselhead1052
Ford Powerstroke 94-98 7.3L
0
11-26-2014 05:42 PM