oh wow, i bet thats expensive, LOL id be to scared to write my own and blow my motor haha

 

the software with burner i wanna say is 5 bills. and ya my inexperience with it is what's keeping me from it

 

i bet you might be able to tweak the regular tunes but i'm not sure?

 

From what I have read bill sends you some "templetes" to work off off. I dont think anything is "locked" so there is always a chance you can really screw things up, but its something I have wanted to do for a long time!

 

well good luck to ya man, if you do do it let us know if screw anything up or not haha

 

With the FU...

You get a chip, a burner, and the software to download tunes (pre-made standard calibrations) from our server. No modification to any of the tunes is possible on the customer's end. You can reburn the chip as often as you'd like and put any available calibration in any of the 6 positions.

With Minotaur....

You get a chip, a burner, the software to burn the chip (same as FU). In addition, you get the Minotaur software that allows you to make any modification to the tuning (factory calibration or any of the handful of standard calibrations that Bill sends with the setup; usually 5 or so). You can make ANY changes that we at PHP can as the definition files that we sell to the customer are the same ones we use on a daily basis for our own tuning. There is no limit to what you can change, either. So, if you want to blow the engine up intentionally as soon as it starts, that's doable.

There is no limit to the number of tunes you can write, and there is no limit to the number of reburns to the chip.

 

 

i believe you can do it csi you know your diesels im debating on chips i thought about ts but sounds like fu is a good one