What would you do?
#1
#2
#3
I emailed and then talked to Mike Cleary on the phone personly,very informative,very direct and to the point.We walked thru a few test and #s i've recorded thru my process of the no start conditions,i've run and rerun the glow plug testing and it seems to come down to this,just thought other opinions/experiences would help in the painful $ process.Leaning towards all injectors with the mileage of truck.Just thought maybe somebody else would step up and let me know their side.
#4
#5
I have run all the test you mentioned,I've tested,retested,retested,the glow plug circuits,replaced the glow plugs with the good Bosch plugs.....took new champions that ohmed the same as the new ones going in.Great oil pressure,great fuel pressure,changed oil twice in 1000miles to make sure it was clean.Look back at my post and you will see I've tried,any other suggestions before I make the plunge would be great.Most of the time the post do not get reanswered if you look back at the postings for this problem.I know your busy so thanks for the help.
#8
#9
#10
I agree with testing everything.....I've run res checks on the harnesses a couple of times on the glow plug terminals and they are fine.Ipr reads fine cold or hot,does this not mean it is good?Same with the icp?If Iam missing something please let me know.Should I pull the harness and res check the glow plug side?I bought a ford manual on disc but have not went thru it again.If I could get away from injectors at this time it would be Awesome.Ready to go chevy hunting and pawn the ford.
---AutoMerged DoublePost---
I've checked ipr and icp and they seem within specs(don't have notes in front of me),Iwill test anything to not buy injectors at this time,howdo you test the idm?Do you need the breakout box for this?Keep the info coming,much much appreciated
---AutoMerged DoublePost---
I've checked ipr and icp and they seem within specs(don't have notes in front of me),Iwill test anything to not buy injectors at this time,howdo you test the idm?Do you need the breakout box for this?Keep the info coming,much much appreciated
Last edited by mod11; 05-13-2010 at 08:23 PM. Reason: Automerged Doublepost