Head gaskets?
#1
Head gaskets?
Could it be?
I have combustion gasses in my cooling system, my radiator cap allowed coolant passed and covered my engine. any tricks or tips when replacing head gaskets on a 01 7.3 turbo.
Any ideas what else it could be, EGR, or is that only on the 6.0. thank ypu for any advice or parts info. Should i install oem gaskets? Are there better aftermarket gaskets? Thanks guys
I have combustion gasses in my cooling system, my radiator cap allowed coolant passed and covered my engine. any tricks or tips when replacing head gaskets on a 01 7.3 turbo.
Any ideas what else it could be, EGR, or is that only on the 6.0. thank ypu for any advice or parts info. Should i install oem gaskets? Are there better aftermarket gaskets? Thanks guys
#2
#3
#4
No sorry needed... Just dont want you to start replacing parts you dont need to...
An injector cup is pressed into the heads at each injector location. You use a bit of locktite to hold them and they seal the coolant from the injector and the cylinder... I dont have a cutaway picture for ya...
https://www.dieselbombers.com/ford-p...ok-inside.html
Look there...
#5
Thread
Thread Starter
Forum
Replies
Last Post
TheMacster
5.9L 24V Performance
2
04-14-2015 07:01 PM
klein444
6.2L & 6.5L Performance
7
04-14-2015 09:04 AM
Hardcorefx4
Ford Powerstroke 03-07 6.0L
4
10-06-2014 07:47 PM