I hear the same about the edge. Good advice on here guys

 

who needs a edge programmer! ! i did have a friend of mine give me a bully dog 4 position chip. the only thing is i dont have a switch to it and bully dog doesnt make it anymore?? but if i get read of the edge program what do yaw suggest i go back with?

 

I would take the edge off and drive the thing stock until you can get custom tunes and gauges. That edge will ruin your truck. Plus custom tunes will blow that edge out of the water. There are many custom tuners, DP, TW, Swamps, PHP, the list goes on. Do some research and you can call them and talk to them see what you like best.

 

I recommend Bill @ PHP, and Jonathan @ Beans. Of the programmers, chips, and tunes I've run, those are about the only two guys that didn't **** me off in the end.