i have a late 99 f250 i orderd a dp tuner i went ot put i tin turn key no wait to start light unplugedd dp tuner wait to start light came on now i have no wait to start light motor cranks over wont start service egine light on i hooked ob2 up and i cant get in any help please

 

You didnt clean the ports on the ECU with a scuff pad. It cleans all the silicon off where you plug the tuner in. Your truck wont start unless they are clean. Go take it apart and clean the ports where you plug the tuner in. It will solve the problem guranteed.

 

When you removed the chip did you have the keys in your hand and or the battery unhooked? If not you may have fried the PCM.

So you installed the chip, and it would not start. No WTS light nothing. Then you removed the chip and you get a WTS light but it will not start? Just trying to understand what your saying.

As was said above, try cleaning the PCM contacts better. But if it will not start now with the chip removed I would bet money you have cooked the pcm.

 

i think i left the keys in the iqnition maybe so i prob did fry it can i take a pcm out of a auto and put it in my truck or no cause mine is stick

 

Auto might work, but it may not start due to some inputs not being there. I would bet you will need a new PCM.

 

yea i orderd a new pcm itll be here next week