2002 f250 problem
#1
2002 f250 problem
Working on my 2002 f250. Got my auto-locking hubs to lock finally!!! Tried it out and everything work great. So I took it out of four high and tried four low. Worked good. Shut truck off for about 15 minutes. Got back in and won't engage now. What am I missing here. I figured by bypassing the vacuum lines and manually locking hubs in it would work.
#2
#3
#4
#5
Ok I'll try the switch. But back too the hubs. These hubs are auto hubs only. I've had one set that read auto and lock. These have no writing on them. The inside is 90% plastic with which looks like a plug in. Have no clue what that is but there completely vacuum operated. So for starters I'm tracing back from the hubs and I know I've got a vacuum leak somewhere. Just need to put my vacuum pump on it and find it. But I'm trying to figure out if its somewhere else as well. Maybe a fuse which I have no idea where those are all located. ??
#6
Ok I'll try the switch. But back too the hubs. These hubs are auto hubs only. I've had one set that read auto and lock. These have no writing on them. The inside is 90% plastic with which looks like a plug in. Have no clue what that is but there completely vacuum operated. So for starters I'm tracing back from the hubs and I know I've got a vacuum leak somewhere. Just need to put my vacuum pump on it and find it. But I'm trying to figure out if its somewhere else as well. Maybe a fuse which I have no idea where those are all located. ??
Snap a picture of them.
If you had a manual T case you get hubs that say Lock and Unlock. If you have an electric Tcase you get Auto or Lock...
#8
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
jeremy01995
12 Valve 2nd Gen Dodge Cummins 94-98
1
09-14-2015 06:34 PM
ish1521
Ford Powerstroke 03-07 6.0L
1
08-26-2015 08:42 PM
Sculpturesylvan
General Diesel Related
0
10-18-2014 10:19 PM