What did I do wrong
#1
What did I do wrong
I have a 95 f250 with a 7.3 l powerstroke. I bought the truck in august and no problems. It got colder and I started having trouble with cold starts. I tested my glow plug relay and found that it was not working. I decided then to make a push button activation for the glow plugs. I cut an extension cord and placed wire connectors on the ends. I placed the wire connectors on the two small posts on the relay. My thinking was that if that was an open circuit I could use the button inside the truck to close the circuit and activate the glow plugs. The first time I used it worked perfectly. I saw the amps draw down and the truck fired right up. The next time I tried the amps didn’t draw down as much. Then the third time it didn’t work at all. I then removed the glow plugs and found that all 8 were not burned up. They were autolite plugs,and from what I hear I am lucky they didn’t swell and break off. I assume that I did something wrong in this process causing the plugs to fail. Any ideas on what I did.
#2
#4
Thread
Thread Starter
Forum
Replies
Last Post
gumborancher
24 Valve 2nd Gen Dodge Cummins 98.5-02
6
04-24-2015 01:25 PM
nelly559
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
02-02-2015 08:19 AM