Ford Powerstroke 94-98 7.3L Discussion of 94-98 7.3 Liter Ford Powerstroke Turbo Diesels

98 7.3 wont start turns over clean fuel

Thread Tools
 
Search this Thread
 
  #1  
Old 03-12-2011, 11:56 AM
daves's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2011
Location: La Paz BCS Mexico
Posts: 12
Received 0 Likes on 0 Posts
Default 98 7.3 wont start turns over clean fuel

I have 98 Ford e350 7.3 ps diesel ambulance. I started the truck drove a couple hundred yards and the motor shut down as if someone turned off the ignition. When try to restart the motor only turns over, there has been no iddication of any problems like running rough or any other sign of fuel problems. I have drained the fuel completly and found no comtamination. I am in Mexico so to find help is diffficult. Also I am have a problem finding a good fuse and relay diagraham online I am hoping for a simple solution to my problem. Hoping for help.
 
  #2  
Old 03-12-2011, 12:03 PM
95powersmoker's Avatar
BOMBARDIER
Join Date: Mar 2010
Location: Ellensburg, WA
Posts: 2,959
Received 187 Likes on 161 Posts
Default

Is the WTS light coming on?

Does the tach move when cranking?

Is there any smoke coming out the tailpipe when cranking?
 
  #3  
Old 03-12-2011, 01:44 PM
daves's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2011
Location: La Paz BCS Mexico
Posts: 12
Received 0 Likes on 0 Posts
Default

Thanks for the reply the wts light is not coming on and the digital tach is not reading but gives a Cerr code and no smoke. daves
 
  #4  
Old 03-12-2011, 01:47 PM
95powersmoker's Avatar
BOMBARDIER
Join Date: Mar 2010
Location: Ellensburg, WA
Posts: 2,959
Received 187 Likes on 161 Posts
Default

Sounds like a CPS... They aren't very expensive and really easy to replace.

Check all your fuses also.
 
The following users liked this post:
daves (03-12-2011)
  #5  
Old 03-12-2011, 01:53 PM
daves's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2011
Location: La Paz BCS Mexico
Posts: 12
Received 0 Likes on 0 Posts
Default

And a CPS is a ? And you find it located where?
 

Last edited by daves; 03-12-2011 at 01:57 PM.
  #6  
Old 03-12-2011, 02:00 PM
95powersmoker's Avatar
BOMBARDIER
Join Date: Mar 2010
Location: Ellensburg, WA
Posts: 2,959
Received 187 Likes on 161 Posts
Default

Camshaft positioning sensor..
 
The following users liked this post:
daves (03-12-2011)
  #7  
Old 03-12-2011, 02:07 PM
97dieselnewb's Avatar
Diesel Enthusiast
Join Date: Aug 2010
Posts: 133
Likes: 0
Received 3 Likes on 3 Posts
Default

It's behind the bottom left pulley, I believe it's 2 bolts holding it in real quick and easy to get from under the truck, just be care full not to strip the bolts
 
The following users liked this post:
daves (03-12-2011)
  #8  
Old 03-12-2011, 02:11 PM
daves's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2011
Location: La Paz BCS Mexico
Posts: 12
Received 0 Likes on 0 Posts
Default

I just found a 30a fuse blown it is number 8 do I just replace and try or would I have to change the CPS first?
 
  #9  
Old 03-12-2011, 02:16 PM
95powersmoker's Avatar
BOMBARDIER
Join Date: Mar 2010
Location: Ellensburg, WA
Posts: 2,959
Received 187 Likes on 161 Posts
Default

Originally Posted by daves
I just found a 30a fuse blown it is number 8 do I just replace and try or would I have to change the CPS first?
Definitely replace a blown fuse... I don't have a fuse diagram in front of me so I'm not sure what that one is for..

The tach not moving usually means bad CPS...
 
  #10  
Old 03-12-2011, 03:12 PM
daves's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2011
Location: La Paz BCS Mexico
Posts: 12
Received 0 Likes on 0 Posts
Default

I replaced the fuse but it blew when I tried to start it, would the CPS cause this to happen.
 


Quick Reply: 98 7.3 wont start turns over clean fuel



All times are GMT -5. The time now is 06:57 AM.