Ford Powerstroke 94-98 7.3L Discussion of 94-98 7.3 Liter Ford Powerstroke Turbo Diesels

Test your knowledge

Thread Tools
 
Search this Thread
 
  #11  
Old 07-03-2010, 02:02 PM
Eagles Fire's Avatar
Diesel Bombers Sponsor
Join Date: Oct 2009
Posts: 45
Received 2 Likes on 2 Posts
Default

Originally Posted by twinboys
If the middle o-ring on an injector was leaking, would oil be showing up in the fuel via the fuel return?
If you have the factory fuel filter housing: Are there any tiny black particles in the filter or bottom of the housing?

~

---AutoMerged DoublePost---

Originally Posted by CSIPSD
Yes...

Copper keeps the injector sealed to the cup, bottom keeps the fuel from the copper, middle keeps the oil from the fuel, top keeps the oil in the injector and out of the valve train...

I know this because there is one tattoed on my arm...


 

Last edited by Eagles Fire; 07-03-2010 at 02:02 PM. Reason: Automerged Doublepost
  #12  
Old 07-12-2010, 08:54 AM
twinboys's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2009
Location: Minnesota
Posts: 508
Received 17 Likes on 16 Posts
Default

Yes, I have the factory fuel filter housing. I have recently had the fuel filter housing out twice and did not notice any black particles, but then again, I wasn't looking and could have easily missed or overlooked that. So, what can you tell me about the black particles?
 
  #13  
Old 07-12-2010, 02:47 PM
Eagles Fire's Avatar
Diesel Bombers Sponsor
Join Date: Oct 2009
Posts: 45
Received 2 Likes on 2 Posts
Default

Originally Posted by twinboys
Yes, I have the factory fuel filter housing. I have recently had the fuel filter housing out twice and did not notice any black particles, but then again, I wasn't looking and could have easily missed or overlooked that. So, what can you tell me about the black particles?
Sometime in 96-97 there was a change in the o-ring material. One o-ring especially would bake from heat until it hardened. Then it would begin shedding particles. Black particles would collect in the filter housing. They were noticeable individually trapped in the filter. Eventually they would stick together & build up in the housing bottom as a sticky soup like mess.
Many thought the fuel tank lining, lines or filler neck boots was the mystery particle source.

Ford revised one o-ring to prevent cross leaks and o-ring degeneration.

G.M.'s attempt to turn gasoline designed engines into diesels developed one really interesting problem. Fuel leaking into the oil pan. No easy way to put out a crank case fire.

Blue smoke at start up is from some oil consumption. Does it stop when the engine's warm? How about warm restarts? Did it just start putting out cold start blue smoke after o-rings were replaced?

~
 
  #14  
Old 07-13-2010, 12:06 AM
twinboys's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2009
Location: Minnesota
Posts: 508
Received 17 Likes on 16 Posts
Default

Has rebuilt stage 1 injectors from Rosewood. The AD's I replaced were so bad it's hard to say if I had any blue smoke hidden in the clouds or not. I now notice zero blue smoke when starting warm.

I get a 1211 code when the hpop reaches 2465 psi. I have ruled out the adrenaline HPOP, injectors, external leaks, etc. When I pulled the AD's to replace them with the rebuilt stage 1's, I noticed a burnt o-ring in the number 5 injector. I don't remember which o-ring. I still need to pull that #5 injector again and see if an o-ring is bad Indicating a problem with the head or possibly injector cup.
 
  #15  
Old 07-15-2010, 06:54 PM
Eagles Fire's Avatar
Diesel Bombers Sponsor
Join Date: Oct 2009
Posts: 45
Received 2 Likes on 2 Posts
Default

Originally Posted by twinboys
Has rebuilt stage 1 injectors from Rosewood. The AD's I replaced were so bad it's hard to say if I had any blue smoke hidden in the clouds or not. I now notice zero blue smoke when starting warm.

I get a 1211 code when the hpop reaches 2465 psi. I have ruled out the adrenaline HPOP, injectors, external leaks, etc. When I pulled the AD's to replace them with the rebuilt stage 1's, I noticed a burnt o-ring in the number 5 injector. I don't remember which o-ring. I still need to pull that #5 injector again and see if an o-ring is bad Indicating a problem with the head or possibly injector cup.
The warm start no blue smoke is good, & sounds normal. These models do smoke blue when cold with normal wear. Piston rings were redesigned in the 99 up 7.3's possibly to reduce the cold start smoke. Other blue smoke sources: the o-ring under the fuel pump, turbo, and normal valve guide wear. The burnt o-ring could likely be from hot combustion gases. Cup could cause it as CSIPSD said.


~
 
The following users liked this post:
twinboys (07-16-2010)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
07-30-2015 10:30 AM
Diesel Bombers
Latest Automotive Industry News
0
07-27-2015 12:40 PM
Diesel Bombers
Latest Automotive Industry News
0
11-20-2014 11:20 AM
Diesel Bombers
Latest Automotive Industry News
0
10-16-2014 07:10 PM
Diesel Bombers
Latest Automotive Industry News
1
10-11-2014 06:25 AM



Quick Reply: Test your knowledge



All times are GMT -5. The time now is 05:19 AM.