Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

Huge gains from FICM ONLY tune!

Old Mar 10, 2012 | 05:55 AM
  #61  
Powerstroking814's Avatar
Diesel Enthusiast
Joined: Jan 2012
Posts: 247
Likes: 8
From: Erie pa
Default

Now I did all kinds of research last night on upgrading my evo and on your website from what I understand I can't and don't find anything on it! But I'm going with what you say so I'm going to figure out when I can do it... I want to do the rollback, ECM and TCM and have the custom tunes on my edge... Now my ficm voltage surges at idle, it goes from 48-47.50-47, but never below 47. So is it still good to have stuff done to it? Or should I or could I do the 58v upgrade?

---AutoMerged DoublePost---

Well then, that's good news for you. We can use that as a FICM programmer, a Rollback device, and still put custom tunes on it when were done with all that!

That's what I want to do but I don't see the order form on your website?
 

Last edited by Powerstroking814; Mar 10, 2012 at 05:55 AM. Reason: Automerged Doublepost
Reply
Old Mar 10, 2012 | 06:08 AM
  #62  
Power Hungry's Avatar
Thread Starter
|
Diesel Bombers Sponsor
Joined: Oct 2009
Posts: 53
Likes: 7
From: Jaw-Juh
Default

Here is the form for the FICM/ECM reprogramming:

Reprogram a 6.0L PSD FICM

Here is the form for the Custom Tunes:

Order 6.0L PSD Calibrations for a Gryphon/Evo, CS, or CTS

Let me know if there's anything else I can answer for you.
 

Last edited by Power Hungry; Mar 10, 2012 at 06:12 AM.
Reply
Old Mar 10, 2012 | 07:18 AM
  #63  
Powerstroking814's Avatar
Diesel Enthusiast
Joined: Jan 2012
Posts: 247
Likes: 8
From: Erie pa
Default

Ok I was filling out the form and I came to this?

I own an Edge Evolution Programmer (#10052 or #10053 ONLY) and would like to use it remotely. (CS and CTS models CANNOT be used for FICM and/or ECM reprogramming.)
I don't have the 10052? Mine is 15002 ver 13
 
Reply
Old Mar 10, 2012 | 07:24 AM
  #64  
Power Hungry's Avatar
Thread Starter
|
Diesel Bombers Sponsor
Joined: Oct 2009
Posts: 53
Likes: 7
From: Jaw-Juh
Default

The 10052 and 10053 is a typo. It's supposed to be 15002 and 15003. You're fine. The form is now fixed.
 
Reply
Old Mar 10, 2012 | 08:52 AM
  #65  
Powerstroking814's Avatar
Diesel Enthusiast
Joined: Jan 2012
Posts: 247
Likes: 8
From: Erie pa
Default

Ok cool a couple more ? Now what all can I put on my edge? I need to decide on what I want... I see the economy, atlas 40, atlas 80, and hercuLes for FICM. Now is that something separate? And how do the custom tunes work?

I'll just try to get in contact with you to find out more info
 
Reply
Old Mar 10, 2012 | 01:39 PM
  #66  
Lilpooh's Avatar
Diesel Enthusiast
Joined: Dec 2011
Posts: 180
Likes: 25
From: Sassamansville, Pa
Default

Bill, I'm looking at purchasing the Gryphon (non CS/CTS) with 4 FICM tunes for $399. Will this programmer have the same tune loading as the SCT, meaning I can flash the FICM as many times as I want, then return to stock FICM tuning at my pleasure.

I'm just confirming before I pull the trigger.

Rich
 
Reply
Old Mar 10, 2012 | 08:42 PM
  #67  
Power Hungry's Avatar
Thread Starter
|
Diesel Bombers Sponsor
Joined: Oct 2009
Posts: 53
Likes: 7
From: Jaw-Juh
Default

Originally Posted by Lilpooh
Bill, I'm looking at purchasing the Gryphon (non CS/CTS) with 4 FICM tunes for $399. Will this programmer have the same tune loading as the SCT, meaning I can flash the FICM as many times as I want, then return to stock FICM tuning at my pleasure.

I'm just confirming before I pull the trigger.

Rich
Yes, sir. You can change your programs at your discretion and even return to stock and test on another vehicle, if you should so desire.
 
Reply
Old Mar 12, 2012 | 08:38 AM
  #68  
Lilpooh's Avatar
Diesel Enthusiast
Joined: Dec 2011
Posts: 180
Likes: 25
From: Sassamansville, Pa
Default

Originally Posted by Power Hungry
Yes, sir. You can change your programs at your discretion and even return to stock and test on another vehicle, if you should so desire.
Thanks Bill, I was gonna order it this morning, buy your phone service isn't available on Monday's. Then I was gonna use the order forms on the website, but you don't have a separate form for just the Gryphon non CS/CTS for the 6.0. When I click on "6.0 Gryphon, CS, CTS" the next page says "STOP, this is for the 6.0 Gryphon CS/CTS" there is no mention for just the Gryphon (non-CS/CTS) with the 4 FICM tunes.

I'll call tomorrow morning at 9am.

Rich
 
Reply
Old Mar 12, 2012 | 09:40 AM
  #69  
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

This is all very interesting. I'm glad you've made an appearance over here Bill, we don't get many vendors hanging out in the 6.0 section...
 
Reply
Old Mar 12, 2012 | 11:20 AM
  #70  
Powerstroking814's Avatar
Diesel Enthusiast
Joined: Jan 2012
Posts: 247
Likes: 8
From: Erie pa
Default

Originally Posted by Mdub707
This is all very interesting. I'm glad you've made an appearance over here Bill, we don't get many vendors hanging out in the 6.0 section...
Yes and he is doing an awesome job!! I'm almost ready to order I just can't seem to figure out which ECM and TCM rollback I should go with? I want to get as many mpg's since it seems I'm only getting 10 city max! It's my dd and I'm not doing any hauling yet until I get my toy hauler.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:54 PM.