Huge gains from FICM ONLY tune!
Now I did all kinds of research last night on upgrading my evo and on your website from what I understand I can't and don't find anything on it! But I'm going with what you say so I'm going to figure out when I can do it... I want to do the rollback, ECM and TCM and have the custom tunes on my edge... Now my ficm voltage surges at idle, it goes from 48-47.50-47, but never below 47. So is it still good to have stuff done to it? Or should I or could I do the 58v upgrade?
---AutoMerged DoublePost---
Well then, that's good news for you. We can use that as a FICM programmer, a Rollback device, and still put custom tunes on it when were done with all that!
That's what I want to do but I don't see the order form on your website?
---AutoMerged DoublePost---
Well then, that's good news for you. We can use that as a FICM programmer, a Rollback device, and still put custom tunes on it when were done with all that!
That's what I want to do but I don't see the order form on your website?
Last edited by Powerstroking814; Mar 10, 2012 at 05:55 AM. Reason: Automerged Doublepost
Here is the form for the FICM/ECM reprogramming:
Reprogram a 6.0L PSD FICM
Here is the form for the Custom Tunes:
Order 6.0L PSD Calibrations for a Gryphon/Evo, CS, or CTS
Let me know if there's anything else I can answer for you.
Reprogram a 6.0L PSD FICM
Here is the form for the Custom Tunes:
Order 6.0L PSD Calibrations for a Gryphon/Evo, CS, or CTS
Let me know if there's anything else I can answer for you.
Last edited by Power Hungry; Mar 10, 2012 at 06:12 AM.
Ok I was filling out the form and I came to this?
I own an Edge Evolution Programmer (#10052 or #10053 ONLY) and would like to use it remotely. (CS and CTS models CANNOT be used for FICM and/or ECM reprogramming.)
I don't have the 10052? Mine is 15002 ver 13
I own an Edge Evolution Programmer (#10052 or #10053 ONLY) and would like to use it remotely. (CS and CTS models CANNOT be used for FICM and/or ECM reprogramming.)
I don't have the 10052? Mine is 15002 ver 13
Ok cool a couple more ? Now what all can I put on my edge? I need to decide on what I want... I see the economy, atlas 40, atlas 80, and hercuLes for FICM. Now is that something separate? And how do the custom tunes work?
I'll just try to get in contact with you to find out more info
I'll just try to get in contact with you to find out more info
Bill, I'm looking at purchasing the Gryphon (non CS/CTS) with 4 FICM tunes for $399. Will this programmer have the same tune loading as the SCT, meaning I can flash the FICM as many times as I want, then return to stock FICM tuning at my pleasure.
I'm just confirming before I pull the trigger.
Rich
I'm just confirming before I pull the trigger.
Rich
Bill, I'm looking at purchasing the Gryphon (non CS/CTS) with 4 FICM tunes for $399. Will this programmer have the same tune loading as the SCT, meaning I can flash the FICM as many times as I want, then return to stock FICM tuning at my pleasure.
I'm just confirming before I pull the trigger.
Rich
I'm just confirming before I pull the trigger.
Rich
I'll call tomorrow morning at 9am.
Rich
Yes and he is doing an awesome job!! I'm almost ready to order I just can't seem to figure out which ECM and TCM rollback I should go with? I want to get as many mpg's since it seems I'm only getting 10 city max! It's my dd and I'm not doing any hauling yet until I get my toy hauler.




