Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

oil pressure issues?

Thread Tools
 
Search this Thread
 
  #11  
Old 01-19-2011, 08:00 PM
churkeepwrstrke's Avatar
Diesel Fan
Thread Starter
Join Date: Jul 2009
Location: north carolina
Posts: 75
Received 1 Like on 1 Post
Default

i have had a chance to change the filter yet. but last time i drove it, which was just to town and back. the gauge seemed to be in normal range. i didnnt get the low oil pressure on the dash.
 
  #12  
Old 01-22-2011, 12:20 AM
Zmann's Avatar
Diesel Fan
Join Date: Feb 2009
Location: AZ
Posts: 46
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by ranger518
I would think that it was a guage or the oil presser sensor becuse if you loose any kind of oil pressure your truck will run really bad or die becuse they use high pressure oil to run the fuel injectors and it takes a minn of 500lb to operate the injectors but i would be carefull. How is the truck running?
there is two seperate oil systems the low pressuer LPOP for bearings etc ( this is what the gauge reflects) and then the High pressure system to fire the injectors HPOP

so it may have an issue on the low side without effecting the way it runs
 
  #13  
Old 01-22-2011, 07:23 AM
ranger518's Avatar
Diesel Enthusiast
Join Date: Oct 2010
Posts: 203
Received 5 Likes on 5 Posts
The following users liked this post:
churkeepwrstrke (01-24-2011)
  #14  
Old 01-22-2011, 10:06 AM
Zmann's Avatar
Diesel Fan
Join Date: Feb 2009
Location: AZ
Posts: 46
Likes: 0
Received 2 Likes on 2 Posts
Default

Good link
I don't for the life of me get why people stray from motorcraft filters ?
specially when "diesel filters online" makes them affordable
 
  #15  
Old 01-24-2011, 03:25 AM
churkeepwrstrke's Avatar
Diesel Fan
Thread Starter
Join Date: Jul 2009
Location: north carolina
Posts: 75
Received 1 Like on 1 Post
Default

i usually do use motorcraft. just the last time i changed my oil i was near a napa and just ran in grabbed one.

---AutoMerged DoublePost---

that is good link. gonna put a motorcraft filter back in there asap.
 

Last edited by churkeepwrstrke; 01-24-2011 at 03:25 AM. Reason: Automerged Doublepost
  #16  
Old 01-27-2011, 09:39 PM
churkeepwrstrke's Avatar
Diesel Fan
Thread Starter
Join Date: Jul 2009
Location: north carolina
Posts: 75
Received 1 Like on 1 Post
Default

ok changed the filter, turns out it was a motorcraft filter in there after all. i think it was napa gold fuel filters i put in. but i went on about a 30 min drive and while i am on the throttle the oil pressure is ok. but when i let off or at idle. it reads ZERO. so im thinking there may be something more going on, the pump its self? any ideas?

---AutoMerged DoublePost---
 

Last edited by churkeepwrstrke; 01-27-2011 at 09:40 PM. Reason: Automerged Doublepost
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Durtyd09
5.9 Liter CR Dodge Cummins 03-07
3
11-11-2015 01:43 PM
purnell82
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
07-22-2015 10:42 AM
jhprice
Ford Powerstroke 03-07 6.0L
5
03-29-2015 09:36 PM
powerstroke4178
Ford Powerstroke 03-07 6.0L
4
11-27-2014 02:35 PM
Jeremy Babb
Chevy/GMC Duramax 01-04 LB7
13
10-01-2014 06:27 AM



Quick Reply: oil pressure issues?



All times are GMT -5. The time now is 05:07 PM.