Okay I will check those out. And also. Went out to start the truck today and it started perfectly fine like nothing was even wrong. So I drove it to AutoZone and had them read the code for me. The check engine light read the code P0238. It really has me baffled the way it starts fine sometime and then sometimes it won't. Any ideas now though since you have the code?

 

03's don't have STC fittings.

 

P0238 is turbo boost code, which makes sense since you have that unplugged. My guess is you would need custom tunes to compensate for the Non-VGT turbo you have on there now. I doubt it will ever run correctly without it.

I would call Eric @ Innovative diesel and explain this to him and see what he says. I bet you just need some tunes brotha!

 

Have you checked the connections on the Edge? They are bad about not sealing off. I ran one for about 6 months on my '05. I had the same problem (cranking with no start) everytime i ran it through a carwash. Unplugged the Edge, blew out the connections with an air compressor. This happened 3-4 times then I got rid of it. Good Luck.

 

I'll sell you my edge juice platinum edition!! it's set up to read codes!! and get rid of that K&N quick bud. Lets too much dirt through to your turbo. and i would say your no start probably isn't related to your turbo. Keep us updated with whats going on with it please