Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

Another no start problem :-(

Thread Tools
 
Search this Thread
 
  #11  
Old 10-15-2012 | 10:32 PM
Cowboy_Cadillac's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2011
Posts: 27
Likes: 1
From: Pville,ne
Default

I've come to the conclusion that its gotta be the ipr or the Hpop. Everything else seems to be Workin fine. Gettin oil and fuel to the top
 
  #12  
Old 10-15-2012 | 10:38 PM
bobfbigman's Avatar
Diesel Bomber
Joined: Nov 2009
Posts: 1,942
Likes: 144
Default

still could also be dummy plugs, maybe the oring was weak and the new pump was enough to make it pop
 
  #13  
Old 10-15-2012 | 10:40 PM
Cowboy_Cadillac's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2011
Posts: 27
Likes: 1
From: Pville,ne
Default

How do I check that? Shop air?
 
  #14  
Old 10-15-2012 | 10:46 PM
bobfbigman's Avatar
Diesel Bomber
Joined: Nov 2009
Posts: 1,942
Likes: 144
Default

yes, but you have to get the special fiitng to screw it into the ICP sensor hole, it is 12mmx1.5. or pull the valve covers off and pull the dummy plug, you will need a 10mm allen socket and if you have to replace them you will need a 12mm allen.
 
  #15  
Old 10-16-2012 | 08:50 AM
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

This would be easily monitored by watching ICP actual against ICP desired and IPR duty percent.

Shop air is the next best thing if you don't have a way of reading it.

I hate to see people throw parts at these, chances are it didn't even need 1/2 the stuff you already put on it, but alas...
 
  #16  
Old 10-16-2012 | 11:48 AM
Cowboy_Cadillac's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2011
Posts: 27
Likes: 1
From: Pville,ne
Default

Well I pulled the dummy plug. Don't see any cranks in the o rings but they're almost flush. Not sure how thick they're supposed to be but I've got em out so I'm just gonna get the upgraded version
 
  #17  
Old 10-16-2012 | 01:33 PM
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

Good idea.
 
  #18  
Old 10-18-2012 | 03:01 PM
Cowboy_Cadillac's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2011
Posts: 27
Likes: 1
From: Pville,ne
Default

well dug in deep and pulled the igr and sure enough it was all sorts of screwed up. Got a replacement in and oil pressures back up with no leaks. For some reason now I only have a 1/2 volt to my FICM. Thinkin I got a short somewhere or somethin
 
  #19  
Old 10-19-2012 | 09:16 AM
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

The truck wouldn't run if you truly had a 1/2 volt. Are you reading voltage with monitor of some sort or an actual multi-meter? Does the truck start now or not?

How are the batteries? Are you sure you're checking the right pin on the FICM if you're using a multi-meter? sorry, have to ask these questions haha.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
ish1521
Ford Powerstroke 03-07 6.0L
1
08-26-2015 08:42 PM
thurobred1320
12 Valve 2nd Gen Dodge Cummins 94-98
2
05-05-2015 09:26 PM
96bigD
12 Valve 2nd Gen Dodge Cummins 94-98
9
04-04-2015 04:42 AM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM



Quick Reply: Another no start problem :-(



All times are GMT -5. The time now is 06:06 PM.