Differential Additive / chatters when making tight turns
#1
Differential Additive / chatters when making tight turns
Did a fluid change on rear diff and put 4 ounces of LSD additive in there.
Filled the axle and chatters making tight turns. (I obviously need another bottle in there)
My question is, being I filled the pumpkin until it dripped out of the fill hole, if I suck some gear fluid out, should just suck out 4 or so ounces worth and add another 4 ounces?
Reason I ask is because now that the 4 ounces I added is mixed in the gear fluid, is 4 more ounces going to be enough if I suck out some fluid?
---AutoMerged DoublePost---
fixed it. added another 4 ounce bottle and good to go.
Filled the axle and chatters making tight turns. (I obviously need another bottle in there)
My question is, being I filled the pumpkin until it dripped out of the fill hole, if I suck some gear fluid out, should just suck out 4 or so ounces worth and add another 4 ounces?
Reason I ask is because now that the 4 ounces I added is mixed in the gear fluid, is 4 more ounces going to be enough if I suck out some fluid?
---AutoMerged DoublePost---
fixed it. added another 4 ounce bottle and good to go.
Last edited by Crackshot; 06-21-2012 at 09:44 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
PowerStrokin94
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
03-21-2015 07:15 PM