Rounded tip Stacks
#1
#4
The following users liked this post:
DodgeFatherRamTheDaughter (04-03-2012)
#6
It just felt like a hack job of a kit. I ordered it through my local diesel shop which is probably who deserves the blame. I was under the impression that i was getting a turbo back system but it only ended up being dp back. Also I was never supplied with a decent way to mount my stack so I had to order a 7in stainless steel clamp from pure diesel power and build a custom L bracket to mount it to the bed of my truck. I think that they don't have a "kit" but just a bunch of pipes, elbows, clamps, and tips that you just have to pick from but I didn't order it so don't quote me. All that being said, I have no complaints about the tip its self. It is of good quality and the rounded edge is really unique. Another unique feature of the tip is that the angle on the top is less shallow than your average mitre cut stack. I'll get some pictures up for you too! If you still have your stock exhaust and wanna upgrade to an aftermarket I would recommend buying an mbrp turbo back but then buying the tip from pypes. Wish I would have done it that way!
---AutoMerged DoublePost---
On second thought im a retard and can't seem to load the pictures into this thread........
---AutoMerged DoublePost---
On second thought im a retard and can't seem to load the pictures into this thread........
Last edited by 12vRambo; 04-03-2012 at 07:19 PM. Reason: Automerged Doublepost
The following users liked this post:
DodgeFatherRamTheDaughter (04-03-2012)
#8
Thread
Thread Starter
Forum
Replies
Last Post