a/c lines
#11
#12
if i remeber right the orfice tube should in the condenser's outlet line and with the r-134a fittings its usally the same on all vehicles. the only time it would be different would be a vehicle that used R-12. they made the fittings for r-134a different so you couldn't mix the to
Last edited by 59cummins67; 05-30-2009 at 08:22 PM.
#13
ya i found that out today i ordered the line from napa and everything works so far
---AutoMerged DoublePost---
i knida have a bad fealing about this so i thought i would throw it out. i wired the compressor threw the high pressure port so the pump will shut off when the pressure gets to high. i noticed it cycles about 10 times a minut but it still blows cool air. the condensor has about 3 bent tubes could that cause something like this to happen?
---AutoMerged DoublePost---
i knida have a bad fealing about this so i thought i would throw it out. i wired the compressor threw the high pressure port so the pump will shut off when the pressure gets to high. i noticed it cycles about 10 times a minut but it still blows cool air. the condensor has about 3 bent tubes could that cause something like this to happen?
Last edited by 94cummins12v; 05-31-2009 at 06:17 PM. Reason: Automerged Doublepost
#15
Thread
Thread Starter
Forum
Replies
Last Post