Denny T Stage II Fuel Pin Review
#41
im thinking bout ordering one of the denny t stage 2 pins. and im pretty stoaked about it.. what ive red and seen te youtube videos. ive been impressed... i have an auto so when i remove my tps will i need to mark how many turns it was. and does the cut side face the front of the truck (i.e intercooler, grill)
#44
nothin wrong with more fuel, unless you dont have enough air... more fuel means you need more air and the sotcker only keeps up to a certain point on the high end and its pretty pathetic but get sthe job done on the low end
#46
Sorry, I have been out of country for a while so did not see your "Q" as to anyone that may have pulled using the Denny-T pin. I have plenty of times pulled my 32 5th wheel (14K weight-dry). I did have high EGT's up hills but only could manage 40-45mph's out of her and EGT's on a 6% grade ran as high as 1100- aft turbo. At time I did not have a pre-turbo gauge. After about 30 pulls up the same hills, factory open-air, I dropped a cam follower out of her. I sold the whole truck and bought a '02 w/6 spd manual now.
I can add that this one does not have the power the GenI engine had. :-(
I can add that this one does not have the power the GenI engine had. :-(