fummins swap problems!!
#21
Ok so now my tach isn't working on my truck and ive been screwing around with it for a good week now ive got the right wire that I need since mine was a gasser it is the tan/yellow coming out of the firewall I grounded the other wire to the block. I basically did a frame off resto as well so i had everything off i put the grounds that were in the wiring harness back in the same spot ground the the paint off as i did for new grounds and I'm still not getting a signal i need help
#24
I used one from a 97 explorer it is the same as my 99 v10 here are some pics of how I mounted mine I think you need more senses I only needed 4
---AutoMerged DoublePost---
http://s1125.photobucket.com/albums/l582/deck60/ford%20cummins/
there are some pictures
---AutoMerged DoublePost---
http://s1125.photobucket.com/albums/l582/deck60/ford%20cummins/
there are some pictures
Last edited by deck60; 06-20-2012 at 09:49 PM. Reason: Automerged Doublepost
#25
#26
here is a thread on another site that what I wrote about tach sense the put this thread in the tech folder
tach 99 f350 cummins 12v - Ford Truck Enthusiasts Forums
tach 99 f350 cummins 12v - Ford Truck Enthusiasts Forums
#28
Thread
Thread Starter
Forum
Replies
Last Post