Anyone want to chime in feel free im all ears on what I think I should do with the vss.I have a chev nv4500 trans.I could put a dodge input shaft kit in from autoworld but the mainshaft will still be smaller compared to the dodge.I did have an idea of finding someone to make me a 40tooth reluctor and find a dodge nv4500 and find a way to press it on or however to get it installed but use the chevrolet tailshaft housing with the chev vss.Does anyone know if the reluctors on the gm nv4500 pressed on or made on?I've seen where you can buy the part so I assume it's pressed on.Let me know what you think guys.Thx