Just another Fummins with lots of pics!
#183
Not done yet, but still have it.
Got traction bars to install, rear end has been rebuilt and installed 3:73's, 30 gallon RCI fuel cell to install, putting a 6.0 Powerstroke I/C in, boxing the front of the frame, shackle reversal up front, install a manual trucks ecm, hook the brakes up and power steering lines, drive shafts and its done. Finishing building my motorcycle at the moment, hopefully I'll be able to afford to finish the Fummins before summer.
Got traction bars to install, rear end has been rebuilt and installed 3:73's, 30 gallon RCI fuel cell to install, putting a 6.0 Powerstroke I/C in, boxing the front of the frame, shackle reversal up front, install a manual trucks ecm, hook the brakes up and power steering lines, drive shafts and its done. Finishing building my motorcycle at the moment, hopefully I'll be able to afford to finish the Fummins before summer.
#185
Super nice welds!! Real quality work. I thought this article may help you in selecting the right size line on your conversion.
Rob Parelli AKA strokercummins
Tork Teknology Article Number Two - The Diesel Fuel System and Inlet Line
Rob Parelli AKA strokercummins
Tork Teknology Article Number Two - The Diesel Fuel System and Inlet Line
#187
#189
#190