Looks great!

 

starter in the ash tray, nice

 

When you get that beast going put up a video if you can!!

 

With as many pics as I've posted, that's a given

---AutoMerged DoublePost---

Alt ground to engine block



Made a battery cable since the Dodge cables are meant to be on either side of the engine



All the battery cables and power wires for the puter, still need to connect the Airdog power but I'm waiting till there's a tank for it to suck fuel thru so I dont get any accidental running of the pump with no fluid in it while I work on the computer harness.





Baaaarely got this to fit in the tight space and slip on, torch and never seize got this on the outputs. The Dodge hose was all the way on the outside of the frame, luckily one of the 7.3's hoses worked, just had to trim it down.







Trimmed down the boost tube (pass. side)

 

that thing is looking killer im gettin closer on mine every day got to have here out to paint by the 10th of march

 

Purple/white and Red/orange are the high and low beams. So I wired these to be on at the same time since the lows originally sucked huge *****








God damn these are twice as bright as before since I wired the highs and lows on at the same time, thank god because I could never see anything.

 

So I thought I'd make the best of my 2nd day off and bob tail the rear of the flatbed


Talk about having a wide ***











I knew keeping that old Budweiser sign would come in handy

 

 

Looking good. You are gettin really far on this project.

 

any thought on a fan yet?