98 cummins replaceing kdp
#1
98 cummins replaceing kdp
droped kdp last week, got new [expensive] cover from freightliner. marked all gears and put back exactly as they were. replaced rocker arms and pushrods all in there original position. started to rotate motor when it started to bind, i put a little more force on it thinking i was on a compression stroke. took pushrods back out and had 2 bent on #2 cyl. one had a slight curve the other had more of a rather bad s curve. i worked with them and got them almost perfectly stright. part of what i need to know is it possible to still use them and what could have caused it to happen. could i have damaged the tappetts, i am sure all timeing is correct as i was very careful to mark all gears and never moved the motor after i removed the cam thsnks jimmy
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
10-31-2014 08:10 AM
Diesel Bombers
General Diesel Related
0
10-24-2014 04:40 AM
Omingnome
Diesel In Distress - Support Ticket
5
10-20-2014 12:25 PM