1995 7.3L Won't Run Right.
#11
If that heating element touches the fuel cannister it can short when you turn Check your fuses for the fuel heater fuse and I bet it is blown. Unplug the heater, replace the fuse, and I bet it starts.
#14
That fitting with the wrench on it is the FPR and inside there are the spring that lots of people shim with a BB
and here's a link for an overhead pic... http://catalog.powerstrokeshop.com/p...&subcat1=73203
and here's a link for an overhead pic... http://catalog.powerstrokeshop.com/p...&subcat1=73203
Last edited by Blue01F250; 12-28-2007 at 12:45 AM.
The following users liked this post:
moosehead (12-28-2007)
#15
Thanks alot . This helped me alot. I now have an idea where this stuff is . I can start lookind into it a little bit more. This is a great site. Ičll let you guys know how I make out.
#17
have you checked the wiring to the ipr? You could have thrown that code because the wiring is bad/ not making a good connection.
#18
No problem bud - if you need to know where anything else is - I can take my own pics or find ya one to show ya
Just let us know!
#20
Thanks bud -- I may not know crap about the actualy building /rebuilding of these trucks as I am just jumping into learning hwo to do this stuff myself.. but I sure as heck can go find the answer and post pics
plus it helps me learn too!
plus it helps me learn too!